半正w2021+ モデル 3/Y レーザー彫刻アンビエント照明アップグレードキット

Don’t bother, visit our South California official shop for the "Hansshow Official Installation Service," where our experts are dedicated to the flawless installation of your Tesla accessories.Email: inquiry@hansshow.com,Phone: + 1 (949) 358-4793, Tech Support:Phone: + 1 (949) 992-7013. North America Office: 3480 W Warner Ave (Ste. N), Santa Ana, CA 92704, USA

1.The car door light does not turn on.

Possible reason: Incorrect power sourcing.

Solution: Plug into the power source at the cigarette lighter position. If you detach the light strip and test it individually, there might be a short circuit in certain areas of the light strip. If the voltage is unstable and below the working voltage, ensure the power voltage is above 12V.

2.Certain areas have abnormal colors and are not synchronized.

• Possible reason: Light strip short circuit.
• Solution: Check the light strip wiring and adjust individual colors to see if they appear normal.

3.The touch panel cannot be controlled.

• Possible reason: The fuse in the power adapter line has blown.
• Solution: Replace the fuse in the power adapter line. If the touch panel is damaged, replace the entire panel.

4.The panel's touch control does not work.

• Possible reason: Control module is damaged.
• Solution: Replace the control module.

5.Does it consume a lot of power?

It has ultra-low power consumption, requiring only 6W.

6.Can it be used for both Model 3 and Model Y?

No, the luminous horn cover molds are different, but everything else is the same.

7.Product Dimensions and Weight

The product measures 38.58 x 5.51 x 20.67 inches, with an approximate weight ranging from 7.28 to 8.38 pounds.