Hansshow Running Boards For 2022+ Rivian R1T/R1S

Takes less than 2 hours to install. I was able to install solo on my and my sister's R1S without issue. Just needed an impact drill to loosen a few bolts. Highly recommend based on quality and ease of install.

Great running boards at a very reasonable price. Delivery from Hansshow was very fast! They even gave me some recommendations for installation service since I did not want to do it myself. Looks great and, most of all, my wife and my mom really like how much easier it is now to step in and out.

Either the brackets were mislabeled, or they sent the wrong one, but I figured it out.

Nice product. Parts are well built. Instructions as of little use as the quality of the copies was terrible. After 20 minutes of trying to get brackets to fit, I realized that the drivers side and passenger side brackets were mislabeled (backwards). Once I got that figured out, the install was easy. Took about 1 hour of real work and half an hour of frustration and internet searching to complete.

Work great, great price too. I put the smaller R1S blossom style boards on my R1T and while short, they do line up with the bottom door trim just fine. Kind of a pain to cut the plastic panels and refit them, but it is what it is.

Very sturdy and good looking running boards for R1S. They were labeled incorrectly for driver vs passenger sides but figured out fast and after install looks great.

Well for starters stripped out very first frame bolt with that r55 wrench you sent wasn’t the right one the the brackets don’t allaigen straight we had to swap out a couple there were 3 driver side and 3 passenger side they don’t alaigen very well that R1s is shorter than the R1’s the man that installed mine has an R1T and also the directions not to good and there’s a bag of bolts unknown what there for they still look good are are real good go getting in R1S

The product is very good, sturdy once fixed. Overall, a decent product.it is straight and does not have contours that matches the car. For a single person, the installation takes 4-6hrs if all tools are present.

Needs Improvement:
1. As already told by many, the driver side and passenger side brackets are reversed. This is a waste of time if you go by the stickers.
2. The T55 Torx wrench that is provided is not a good quality and it spoils the bolt by scraping it. This must either be TP55 as the bolt is TP55 and not T55 or it must not be provided.
3. The instruction manual says to remove 15mm bolt at the front, but there is no tool to remove it. Also, due to the reason in point #1, there is no need to remove this bolt.
4. The plastic prying tool to remove the plastic panels is very short and can’t be used easily.